Yellow and red fiberglass twin step ladder FGD105HA
The FGD105HA produced by Abctools is a fiberglass twin step ladder that can be used around electricity. It is 6 inches in length and has 5 steps, the open height is 1730mm, the closed height is 1850mm, and the weight is 12.8 kg. This ladder can be used on both sides, which is safer and more stable than a single-sided ladder. The wide podium at the top can be used to place relatively large tools and buckets, which is more convenient to work; because each step is reinforced by double rivets and diagonal braces, Therefore, its load rate is particularly high, which is IAA type, which means its load capacity is 375lbs, 170kg.
1. For use around electricity.
2. The large platform at the top can place large tools, which makes our work more efficient.
3. Foldable design for easy storage
4. The rubber feet at the bottom make the ladder more stable.
5.Double rivets combined with diagonal bracing for reinforcement, higher load rate.
What is the difference between the FGD1**HA, FGD1**, and FGD2**?
First, take a look at their top positions. The top of FGD1**HA and FGD1** is a large platform with no gaps on which large tools can be placed. The edge of the top platform of FGD1** is covered by rubber, while FGD2* The top of * is not a wide platform, there is a big gap between the two parts.
Secondly, each step of FGD1**HA is reinforced by double rivets and diagonal braces, each step of FGD1** is reinforced by single rivets and diagonal braces, while FGD2** only the bottom and top steps are Reinforced with a single rivet and diagonal brace. This also determines the difference in their load rating:
The load rating of FGD1**HA is IAA type (375lbs/170kg);
The load rating of FGD1** is I type (250lbs/113kg);
The load rating of FGD2** is II type (225lbs/102kg);